ProPink ComfortSeal™ Gun Foam

ProPink ComfortSeal™ Gun Foam 24 oz (Case of 12)

$150.84

Description Owens Corning® ProPink ComfortSeal™ Gun Foam Sealant is a multi-purpose one-component polyurethane foam designed specifically to fill and seal cracks, crevices, and smaller cavities on flat or irregular surfaces.

Features

• 24 oz. cans of a one component polyurethane
• Interior/exterior use
• Tack free in 5 minutes
• Cuttable in less than an hour
• Fully cured within 24 hours depending upon moisture and temperature conditions
• Can be sanded, painted or stained once cured
• Will adhere to most building materials (exceptions: Tefl on® , silicone, oils and greases, mold release agents, and similar surfaces)
• Water resistant and will not harm electrical wire insulations, rubber, PVC, CPVC, polyethylene, or other plastics
• Requires a reusable dispensing unit for metered applications Standards, Codes Compliance
• Complies with AAMA Document 812-04
• UL Classified–File # R26533 Caulking and Sealants
• NFPA 30B Classifi cation: Level 2 Aerosol

SKU: 644228 Category: SPRAY FOAM

Weight	24 lbs
Dimensions	12 x 10 x 12 in
Product	SPRAY FOAM
Class	Standard
Ships Via	UPS

Weight

24 lbs

Dimensions

12 x 10 x 12 in

Product

SPRAY FOAM

Class

Standard

Ships Via

UPS

ProPink ComfortSeal™ Gun Foam

Installation
• Bead can be controlled by depressing the trigger, or by
the regulator screw on the back of the dispensing gun
• Foam application can be interrupted as needed when
instructions for dispensing gun are followed
• Empty cans must be replaced immediately with a new can
• Fill-cavity only ⅓ full with foam to allow for expansion
• During the curing process the foam will expand up to
200%. Overfilling can buckle substrates
• For cavities larger than 3″ in diameter, dampen substrate
to supplement atmospheric humidity in affecting
consistent cure throughout applied foam
• Cured foam exposed to sunlight must be covered with
paint or stain

Yields
• ¼ ” (6.3 mm) BEAD = 4,403 ft. (1,342 m)
• ⅜ ” (9.5 mm) BEAD = 1,957 ft. (596 m)
• ½ ” (12.7 mm) BEAD = 1,101 ft. (336 m)
Yields are based on theoretical calculations, for comparison purposes, and will vary depending on
ambient conditions and particular applications.